If you’re one of the many people wondering how they can get better sound out of their vehicle’s sound system, well then you’re in luck. In this blog article, we’re going to go over the different ways, our car audio experts believe, are the best and most effective to get better sound out of your car audio system. So, here are the best ways to improve the sound in your vehicle! And as always, if you have any further questions for our experts, feel free to comment below this article!
First off, it is very important that your car audio system (or any audio system for that matter) has the appropriate wiring and that the wiring is in good condition. It is crucial to your audio system that your wiring and connections have good quality wire, good grounds, good tuning, as well as good RCAs. It is also important that you have matching wire and ground sizes, and that your wiring sizes are True to Size. Our experts suggest that if you want a solid connection, you should use Oxygen Free Copper wire instead of Copper Clad Aluminum. Following these tips will ensure that your amplifier, speakers, and subwoofers have a solid connection and are getting the adequate amount of power to run without failing or clipping.
2Install Car Speakers So That They’re Flush With the Door Panel
Second, it is important for your car audio sound system, that your car speakers are installed so that they meet with the door panels. The way our experts accomplish this is either by making a baffle or spacer ring out of MDF and seal it with a foam gasket where the back of the speaker meets that plate or the door panel itself. On the front of the speaker where you have the rubber surround, you will want to isolate the exterior with foam. This will make your car speakers have more directional sound toward the outside of the door panel. This, in turn, will make your car speakers’ sound a lot better. Unfortunately, if your aftermarket car speakers aren’t sealed off with foam, there is a chance that your sound is going to feed into the door panel instead of coming out of the speaker’s grill, which will not provide good sound.
3Add Sound Dampening to Your Vehicle
The next tip our car audio experts have for getting the best sound out of your system is to add sound dampening to the vehicle. It is important to your sound’s quality that you add sound dampening to the door panels. This will make your car speaker’s sound much more solid than it would sound without sound dampening. Since the door acts as an enclosure for your midrange frequencies, so the more sealed off the door is, the better midbass you will get in your system.
4Make Sure Your Subs Have the Right Enclosure
It is crucial for your car audio’s sound, specifically for those lower frequencies within your system, that your subwoofers have the correct type and size of enclosure. Pay attention to the box specifications that your subwoofers need and make sure that your prefab or custom built subwoofer enclosure comes as close as possible to those specifications. In addition, make sure that whatever box you do get, that it is going to fit your vehicle and that it will sound good in your vehicle. If you are building a custom subwoofer enclosure, it is always a good idea to tune the sub enclosure for your specific vehicle.
It is incredibly important that you have enough power running your system. First, you should make sure you have the correct type and amount of car batteries (also called power cells) running your audio system. In addition, your system may require that you invest in an upgraded alternator or a secondary battery.
We hope these car audio sound tips helped some of you guys out there! Until next time, we’ll cya later!