Tag: infrasonic

S/PDIF Combos Coming Soon To Sonic Electronix!

What the heck is “S/PDIF?”

No, it’s not a typo. S/PDIF stands for “Sony/Phillips Digital Interconnect Format,” or “Sony/Phillips Digital Interface,” and is a means through which users may transmit audio signals digitally, which makes for higher fidelity: digital in, digital out. Right now, there are two consumer-level digital transmission interfaces: HDMI and S/PDIF. Most people reading this probably know that HDMI transmits both video and audio, however, what you might not know is that S/PDIF only transmits audio.

So you might ask, “Why bother with S/PDIF then?” Well, not all equipment has an HDMI input or output, which should be pretty obvious when dealing with things like audio interfaces and reference monitors that don’t handle video signals. In some situations, like separate sound and video outputs from computers, you might even need to hook up both HDMI and S/PDIF cables.

Blow 4D

The Blow 4D reference monitors' DAC module which has both S/PDIF coaxial and 3-pin AES/EBU connections


S/PDIF has two different types of connectors: coaxial (RCA) and optical (TOSLINK). The coaxial cables are usually found colored orange in order to differentiate between other colored RCA connectors such as yellow for video, and red and white for analog audio. The optical cables are far more delicate and are made of fiber optics.

The upcoming combos…

We at Sonic Electronix value high-fidelity audio above all else, and that’s why we’re currently putting together combos that link pieces of gear based on S/PDIF. The picture above is taken from the Infrasonic Blow 4D reference monitors, about which I also recently wrote a blog. We’ll be pairing up these fantastic speakers with just about any piece of gear in our inventory that has S/PDIF output, and as always, we’ll be offering them to you at the special discounted prices you love and have come to expect from Sonic Electronix!

READ MORE +

Hear What You’re Missing With Infrasonic’s Blow4D Nearfield Reference Monitors

Apparently, Infrasonic owns a trademark on the phrase, “Hear What You’re Missing.” They’re certainly justifiably confident in holding that trademark. Infrasonic makes a variety of products, including reference monitors, FireWire/USB/PCI audio interfaces, MIDI controllers and microphones, and as far as this blogger can tell, they’re all top-notch. These monitors, the Blow 4D, are a fantastic example:

Infrasonic Blow4D

Bi-Amplified Nearfield Studio Monitor Speakers w/ Built-in 24-bit/192kHz DAC, Bass Reflex & Much More

The Infrasonic Blow 4Ds are a pair of 55-Watt, 4″ bi-amplified near-field studio monitors. They feature a two-way design, a bass reflex system and natural silk dome tweeters in order to reproduce the broad frequency response and overall stellar-quality sound that they do. Their high-strength MDF composite cabinet design also contributes to that.

Infrasonic Blow4D back

The Blow 4Ds have both analog AND digital inputs, with a stunning 24-bit/192 kHz DAC built right into it.

Don’t be fooled by the “BLOW4″ you see in the picture. It’s easy as pie to tell the difference. The difference (and, if I may, what a beautiful one it is) is that the Blow 4Ds come equipped with a DA-912 digital interface module, allowing users to utilize a number of digital inputs such as AEU/EBU(XLR), S/PDIF(RCA) and an RCA thru connector.

The DAC (Digital-to-Analog Converter) in the DA-912 has an astonishing 24-bit/192kHz resolution which translates to 123 dB of dynamic range. Keen observers will also notice the variety of filters above the DA-912 module that help control low and high frequencies in a wide variety of ways. Truly, the Infrasonic Blow 4Ds are some of the most outstanding near-field studio monitors on the market today. With speakers this accurate and powerful, you’ll surely “Hear What You’re Missing.™”

Make sure to click one of the images or this link to check out the Blow 4D product page for further information!

READ MORE +