Tag: Kenwood KAC-7205

Types of Car Amplifiers

Audiovox CMOS2 Rear View Back-Up Camera

By Ricky C. – Product Specialist

When searching for a car audio amplifier, it may seem intimidating when trying to narrow down which type would be correct for your application.  Out of our selections, we categorize amplifiers by the amount of channels and occasionally by their circuitry class.  You can choose from Amplifiers that are Monoblock, 2-Channel, 3-Channel,  4-Channel, 5-Channel, and even 6-Channel.  Now it’s apparent that some of these amplifiers have more channels than others, but what does this mean?

A 2-Channel Amplifier, like the Kenwood KAC-7205, is primarily used for outputting audio towards two door speakers, or to two subwoofers.  However, you can even bridge the two channels together for higher output towards one channel, like a subwoofer that requires more power.

4-Channel amplifiers like the MTX Audio TC6004 are more popular to be used primarily for amplifying four door speakers.  4-Channel Amplifiers are one of the most popular amplifier choices, purely because most cars have 4 locations for door speakers.

A Monoblock amplifier is also an extremely popular amplifier to chose.  These are single channel amplifiers which usually have more dedicated power built in.  Most of the time, Monoblocks are used to drive a subwoofer, or multiple subwoofers wired together.

So far, what we’ve learned is that if you want to amplify both of your door speakers and your subwoofer you are going to need multiple amplifiers.  The most common combination is a 4-Channel and a Monoblock setup.  This may be common, but you want to save more space.  You want to have less components to manage.  Enter the 5-Channel amplifier.  A 5-Channel Amplifier is basically two amps built into one, a great example is the Kicker ZX700.5.  It’s a 4-channel amplifier which will output a moderate amount of wattage to four door speakers.  But then, it has a little surprise found in its fifth channel.  The fifth channel has dedicated power to output made for higher powered applications, like a subwoofer.  One thing with 5-Channel amplifiers is that they have been designed to do the work of two amplifiers, so they may not have as much overall dedicated power as the previously mentioned 4-Channel and Monoblock combination.  A 3-Channel amplifier, like the Kicker ZX550.3 operates very similar to a 5-Channel, but it will be basically a 2-Channel amplifier and a Monoblock combined.

Finally, the 6-Channel Amplifier. This type of beast wasn’t designed like a 5-Channel with the large fifth channel.  The 6-Channel amplifier usually follows the 4-Channel amplifiers design, but is made for a few more speakers.  These are perfect for adding an extra few custom speakers, or perfecting that audiophile setup.   JL Audio’s XD600/6 is a great example of a hi-fi audio amplifier that pushes dedicated power to 6 separate channels!

READ MORE +

Kenwood KAC-7205 Amplifiers

Kenwood KAC-7205

By Seth W. – Product Specialist

Every year the car audio consumer waits with anticipation the release of Kenwood’s new mobile product line. Year after year they release new, innovative products and upgrading the previous years model. One such upgrade is the Kenwood KAC-7205. It is a 2-channel amplifier that is powerful enough for just about any set of speakers or subwoofer on the market. The most notable difference between this amplifier and last year’s model is the all black casing. It gives the amp a smoother look that will blend in the any vehicles interior. To enhance the cooling efficiency of the electrical components inside the amplifier, Kenwood has matched an aluminum heatsink with two cooling fans that will quickly and effectively remove the heat that is generated inside of the amplifier. That heat removal results in a more efficient amplifier that will stay true to its CEA-2006 ratings. Each terminal and connection on the KAC-7205 is gold-plated for the best possible transfer of power or signal. To help this amplifier live up to it’s series name, Kenwood has designed this Performance Series amplifier to be compatible with 2-ohm loads for plenty of power and stability.

For those that look to keep a factory look and stock stereo in their car, the amplifier is great for adding aftermarket components. The speaker level inputs will connect directly to the speaker wire outputs from any car stereo, making installation and OEM integration simple. In conjunction with this, the amp features signal sensing turn-on technology that will automatically power on the amplifier when an input audio signal is detected. For installers, this feature becomes especially valuable. A low-pass filter and bass boost adjustment located on the side of the amplifier make this a perfect choice for getting the best sound out of a subwoofer. The 2010 Kenwood line is full of high-quality components and superior audio products. The Kenwood KAC-7205 2-Channel amplifier is proof that a great amp exists on a limited budget.

READ MORE +