Car Subwoofer Wiring Rules

2 subs SVC 4 ohm 2ch amp

When it comes to installing your ideal sound system into your car, there is nothing trickier than getting the wiring correct. You’ve got cables running from the battery, through the firewall to the dash and others from the door panels all the way to the trunk of your car. With so many different wiring options available, it can prove difficult to get each aspect wired correctly.

Rule Description
1. Always Read the Instruction Manual The instruction manual comes with your product for a reason. It was written by the manufacturer. All the specifications you will need to adhere to are listed. Do not overlook the importance of this tiny pamphlet.
2. Always Plan Ahead Before you begin the install always plan ahead. Get all parts, accessories and create a game plan. This will ensure the installation is done correctly the first time around.
3. Make Sure the Batter is Disconnected First When dealing with electrical components it is always a smart idea to disconnect the power source first to avoid electrocution to you and more importantly to the unit you are about to install.
4. Do Not Under Power the Subwoofer People think that overpowering a subwoofer is the leading cause of destruction. In reality the leading causes are under powering and faulty wiring.
5. Never Overdo It We all love a challenging DIY project to occupy our Sunday. But we all have limits and it is best to know your limits before you begin a project. If you find this project is to difficult, pay a professional nearby to install the unit for you.

One of the most important connections you could make when dealing with car audio is the one between the amplifier and subwoofer. Fortunately, the internet is full of information that should be utilized to properly wire your car’s aftermarket audio project . What’s unfortunate, however, is that most of us end up learning the hard way what NOT to do when dealing with your sound system. Everyone serious audiophile has to deal with clipping, distortion, burnt voice coils, blown subwoofers, swollen capacitors, static, popping, and an array of cooked wires, speakers, amplifiers, drivers and subwoofers. What most car owners do not know is that most of these problems can be associated with bad wiring. If you want to avoid a major mishap that could cause you to lose your entire sound system, here are some basic car subwoofer wiring rules that should be observe when installing your aftermarket system:

[wpsm_numbox num=”1″ style=”2″]Always Read the Instruction Manual[/wpsm_numbox]

[wpsm_offerbox button_link=”” button_text=”Shop Now!” title=”All Subwoofer Sizes” thumb=”” ]

I don’t care how many subwoofers you have wired in your life; only a fool would deny the importance of the manufacturer’s instruction manual. Sure, manuals may seem long, boring and dry, but they will provide you with relevant information concerning your purchase. For example, your subwoofer manual will let you know about what kind of wires you will need, how to wire them correctly, what the minimum and maximum output is, along with information regarding what the buttons and levers do on the unit. Remember, there’s no such thing as too much information, so read up. And remember asking stupid questions is easier then fixing stupid mistakes.

[wpsm_numbox num=”2″ style=”2″]Always Plan Ahead[/wpsm_numbox]

That’s right; before you crack out the tools and start pulling apart your vehicle, you actually have to put a great deal of deliberation into your project. The better your initial plan and design is, the easier and more efficient the wiring and installation will be. For starters, you have to know what size your subwoofer is and how much space you have available for the enclosure. It also helps to know what the effect on your battery will be. Last and most importantly, you have to work with a budget to avoid overspending. Going in blind without a plan is a sure recipe for horrible outcomes and pesky, unnecessary costs.

[wpsm_numbox num=”3″ style=”2″]Make Sure the Battery is Disconnected First[/wpsm_numbox]

[wpsm_offerbox button_link=”” button_text=”Shop Now!” title=”All Amplifier Classes” thumb=”” ]

This one is more of an overall rule of thumb when dealing with any electrical component. Whether you are wiring the amplifier, head unit or subwoofer, always remember to disconnect the negative battery terminal. This will ensure that you can work safely on your subwoofer wiring and avoid electrical short circuits. In a nutshell, if you don’t want to fry both your ass and your entire car audio system, keep the power off.

[wpsm_numbox num=”4″ style=”2″]Do Not Under Power the Subwoofer[/wpsm_numbox]

Contrary to popular belief under-powering your subwoofer can lead to blown or damaged cones. Which means if you are trying to wire a 200W subwoofer to your stock radio, which has 4 channels of just 20 watts per channel, this will destroy your woofer. Rather manufacturers recommend that you slightly overpower your subwoofer if necessary, so buy amplifier. Furthermore the total combined RMS rating of all the subwoofers connected to the amp should not exceed the power the amp produces. For example an amplifier that specifies it has an RMS power rating of 750W and you want to wire two subs to the unit, make sure the combined watts of the subwoofers does not exceed 750W.

[wpsm_numbox num=”5″ style=”2″]Never Overdo It[/wpsm_numbox]

After successfully wiring your subwoofer to the amplifier, many car owners are quite eager to see what their new system can do. Of course, this means cranking up the power and volume to max. If you got your audio equipment from back door dealers who probably rated their equipment erroneously, you could be a few bass pumps away from blowing up your entire system. I’ve seen subwoofers rip in half within their enclosures because they wired for the wrong resistance. Make sure that all your equipment comes from a reliable and trustworthy dealer and even then; you still don’t want to test out the limits like a caveman. Just take it slow and keep the power at recommended levels; rule of thumb the average volume you use should be half your systems capabilities.

Never DIY if You Can’t DIY

While hiring a professional to do your wiring can prove a tad expensive and degrading, you have to understand that the experts are not just there to make random connections with a nearby wire. They are hired to ensure that the job is done the right way for optimum efficiency and sound quality. If you find the project a bit overwhelming and are not sure you’re doing things right, it’s better to leave it to a pro. Your wallet and ears will thank you later for it!


Please enter your comment!
Please enter your name here